2 Port Way Masthead Splitter Booster 4G Lte F Connector Aerial Signal Amplifier 5055538140969
1 Input 2 output – Outdoor Rated Masthead Booster / AmplifierOverview – Our 1 input 2 output masthead amplifier is perfect if you live in an area with a weak aerial signal. The amplifier connects up to your aerial via its F-connector screw on type connection, amplifies the signal and allows you to split the signal and send it down 2 output cables.4G LTE Filter – A lot of aerials suffer from interference from 4G mobile phone signal, our unit has a filter especially designed to block this type of interference giving you the best quality signal at all times.How to install: 1. Open the outer casing by pressing the two latches on the side and lift up the cover to reveal the amplifier.2. Connect the aerial to input of the amplifier.3. Connect the output1 of the amplifier to masthead power supply or TV receiver, and output 2 to secondary TV set or distribution amplifier for further signal distribution.4. Place the coax lead in the pre-cut groove and close the outer casing lid. Use the cable tie supplied to secure the amplifier to the mast.Key Features: Compatible with analogue and digital TV signalsSupplied with outdoor rated IP44 casingCompletely shielded for minimum interferenceHigh gain & low noiseFitted with a maximum output limiter to prevent any overloadsTechnical Specification:Compatible signals – DVB-T, ISDB-T, DMN-T/H and ATSCColour – BlackMaterial – durable plasticOutdoor rated – IP441x F-Connector input2x F-Connector outputsDimensions – 110mm x 105mm x 52mm (LxWxH)Input frequency band: UHF/VHFOutput frequency range: 47-790MHzDC Pass: All ports 400mA Max 75ohmsInsertion loss: 47-750MHz: 3.5dBInsertion loss: 750-790MHz: 5.5dBReturn loss: 47-750MHz: 10dBReturn loss: 750-790MHz: 12dBIsolation: 47-750MHz: 18dBIsolation: 750-790MHz: 18dBWeight – 200gIf you require a masthead amplifier power supply, please search our shop or get in touch.
Price now:
From
£15.69
To
£16.49
Price History:
Details:2 Port Way Masthead Splitter Booster 4G Lte F Connector Aerial Signal Amplifier 5055538140969
1 Input 2 output – Outdoor Rated Masthead Booster / AmplifierOverview – Our 1 input 2 output masthead amplifier is perfect if you live in an area with a weak aerial signal. The amplifier connects up to your aerial via its F-connector screw on type connection, amplifies the signal and allows you to split the signal and send it down 2 output cables.4G LTE Filter – A lot of aerials suffer from interference from 4G mobile phone signal, our unit has a filter especially designed to block this type of interference giving you the best quality signal at all times.How to install: 1. Open the outer casing by pressing the two latches on the side and lift up the cover to reveal the amplifier.2. Connect the aerial to input of the amplifier.3. Connect the output1 of the amplifier to masthead power supply or TV receiver, and output 2 to secondary TV set or distribution amplifier for further signal distribution.4. Place the coax lead in the pre-cut groove and close the outer casing lid. Use the cable tie supplied to secure the amplifier to the mast.Key Features: Compatible with analogue and digital TV signalsSupplied with outdoor rated IP44 casingCompletely shielded for minimum interferenceHigh gain & low noiseFitted with a maximum output limiter to prevent any overloadsTechnical Specification:Compatible signals – DVB-T, ISDB-T, DMN-T/H and ATSCColour – BlackMaterial – durable plasticOutdoor rated – IP441x F-Connector input2x F-Connector outputsDimensions – 110mm x 105mm x 52mm (LxWxH)Input frequency band: UHF/VHFOutput frequency range: 47-790MHzDC Pass: All ports 400mA Max 75ohmsInsertion loss: 47-750MHz: 3.5dBInsertion loss: 750-790MHz: 5.5dBReturn loss: 47-750MHz: 10dBReturn loss: 750-790MHz: 12dBIsolation: 47-750MHz: 18dBIsolation: 750-790MHz: 18dBWeight – 200gIf you require a masthead amplifier power supply, please search our shop or get in touch.
Price now:
From
£15.69
To
£16.49
This site contains affiliate links for which we may be compensated.
B&Q
11.12% (+ £1.57)
New
£15.69
OnBuy.com
3.13% (+ £0.50)
New
£16.49
OnBuy.com
0.00% (~ £0.00)
New
£16.49
Product Description
1 Input 2 output – Outdoor Rated Masthead Booster / AmplifierOverview – Our 1 input 2 output masthead amplifier is perfect if you live in an area with a weak aerial signal. The amplifier connects up to your aerial via its F-connector screw on type connection, amplifies the signal and allows you to split the signal and send it down 2 output cables.4G LTE Filter – A lot of aerials suffer from interference from 4G mobile phone signal, our unit has a filter especially designed to block this type of interference giving you the best quality signal at all times.How to install: 1. Open the outer casing by pressing the two latches on the side and lift up the cover to reveal the amplifier.2. Connect the aerial to input of the amplifier.3. Connect the output1 of the amplifier to masthead power supply or TV receiver, and output 2 to secondary TV set or distribution amplifier for further signal distribution.4. Place the coax lead in the pre-cut groove and close the outer casing lid. Use the cable tie supplied to secure the amplifier to the mast.Key Features: Compatible with analogue and digital TV signalsSupplied with outdoor rated IP44 casingCompletely shielded for minimum interferenceHigh gain & low noiseFitted with a maximum output limiter to prevent any overloadsTechnical Specification:Compatible signals – DVB-T, ISDB-T, DMN-T/H and ATSCColour – BlackMaterial – durable plasticOutdoor rated – IP441x F-Connector input2x F-Connector outputsDimensions – 110mm x 105mm x 52mm (LxWxH)Input frequency band: UHF/VHFOutput frequency range: 47-790MHzDC Pass: All ports 400mA Max 75ohmsInsertion loss: 47-750MHz: 3.5dBInsertion loss: 750-790MHz: 5.5dBReturn loss: 47-750MHz: 10dBReturn loss: 750-790MHz: 12dBIsolation: 47-750MHz: 18dBIsolation: 750-790MHz: 18dBWeight – 200gIf you require a masthead amplifier power supply, please search our shop or get in touch.
Product Specifications
General | |
|---|---|
Material | lead |
Brand | B&Q |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.