



Peelaway 7 Paint & Varnish Remover removes multiple layers of most modern industrial and domestic coatings in one application. Its low-odour, methylene chloride-free, non-caustic paste is easy to use and naturally degradable. Suitable for intricate areas and surfaces including wood, plaster, brick, masonry and metal. It is also recommended for veneer, plywood and aluminium and is frequently architecturally specified. Do not use on certain plastics, including polycarbonate and Perspex. Test before use on unskimmed drywall. Always carry out a test patch before general use. Test areas should typically be 75 x 75mm to 300 x 300mm. Apply Peelaway paste 1-6mm thick depending on the coating type, age and number of layers. Place the Peelaway blanket print-side out onto the paste, rub gently to remove air and pierce any bubbles. Leave for 2-48 hours, depending on coating type and thickness. For areas involving different elevations several test patches should be applied to accommodate the possibility of different coatings and the effects of weather on exterior surfaces. To remove, the spatula should be inserted into the paste and a section gently lifted away. If the original surface is apparent, the test patch can be removed and the surface wiped with a damp sponge. If paint can still be seen, the test patch should be replaced and re-examined after a few hours. Once the correct paste and timing for the project has been established together with the thickness required, the designated paste should be applied, the Peelaway blanket laid over the paste and left for the time indicated by the test patch. Full instructions are on the container Each project can potentially give different results and this is why it is imperative to carry out Test Patches. Leaving on for not long enough could mean the process has not completed. Leaving on too long could damage the substrate or you may find the Peelaway blanket and paste becomes too hard and difficult to clean up., Weight: 8.81849048 pounds, Manufacturer: Barrettine
Price now:
From
To
Price History:
Details:Peelaway 7 Paint & Varnish Remover removes multiple layers of most modern industrial and domestic coatings in one application. Its low-odour, methylene chloride-free, non-caustic paste is easy to use and naturally degradable. Suitable for intricate areas and surfaces including wood, plaster, brick, masonry and metal. It is also recommended for veneer, plywood and aluminium and is frequently architecturally specified. Do not use on certain plastics, including polycarbonate and Perspex. Test before use on unskimmed drywall. Always carry out a test patch before general use. Test areas should typically be 75 x 75mm to 300 x 300mm. Apply Peelaway paste 1-6mm thick depending on the coating type, age and number of layers. Place the Peelaway blanket print-side out onto the paste, rub gently to remove air and pierce any bubbles. Leave for 2-48 hours, depending on coating type and thickness. For areas involving different elevations several test patches should be applied to accommodate the possibility of different coatings and the effects of weather on exterior surfaces. To remove, the spatula should be inserted into the paste and a section gently lifted away. If the original surface is apparent, the test patch can be removed and the surface wiped with a damp sponge. If paint can still be seen, the test patch should be replaced and re-examined after a few hours. Once the correct paste and timing for the project has been established together with the thickness required, the designated paste should be applied, the Peelaway blanket laid over the paste and left for the time indicated by the test patch. Full instructions are on the container Each project can potentially give different results and this is why it is imperative to carry out Test Patches. Leaving on for not long enough could mean the process has not completed. Leaving on too long could damage the substrate or you may find the Peelaway blanket and paste becomes too hard and difficult to clean up., Weight: 8.81849048 pounds, Manufacturer: Barrettine
Price now:
From
To
This site contains affiliate links for which we may be compensated.
Peelaway 7 Paint & Varnish Remover removes multiple layers of most modern industrial and domestic coatings in one application. Its low-odour, methylene chloride-free, non-caustic paste is easy to use and naturally degradable. Suitable for intricate areas and surfaces including wood, plaster, brick, masonry and metal. It is also recommended for veneer, plywood and aluminium and is frequently architecturally specified. Do not use on certain plastics, including polycarbonate and Perspex. Test before use on unskimmed drywall. Always carry out a test patch before general use. Test areas should typically be 75 x 75mm to 300 x 300mm. Apply Peelaway paste 1-6mm thick depending on the coating type, age and number of layers. Place the Peelaway blanket print-side out onto the paste, rub gently to remove air and pierce any bubbles. Leave for 2-48 hours, depending on coating type and thickness. For areas involving different elevations several test patches should be applied to accommodate the possibility of different coatings and the effects of weather on exterior surfaces. To remove, the spatula should be inserted into the paste and a section gently lifted away. If the original surface is apparent, the test patch can be removed and the surface wiped with a damp sponge. If paint can still be seen, the test patch should be replaced and re-examined after a few hours. Once the correct paste and timing for the project has been established together with the thickness required, the designated paste should be applied, the Peelaway blanket laid over the paste and left for the time indicated by the test patch. Full instructions are on the container Each project can potentially give different results and this is why it is imperative to carry out Test Patches. Leaving on for not long enough could mean the process has not completed. Leaving on too long could damage the substrate or you may find the Peelaway blanket and paste becomes too hard and difficult to clean up., Weight: 8.81849048 pounds, Manufacturer: Barrettine
General | |
|---|---|
Material | wood/metal/plywood |
Size | 7 |
Brand | Barrettine |
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgement, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalised items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.