If it says T-Cut…it works! T-Cut Perfect Bumper & Trim is the number one solution for scuffed and sun-faded bumpers and trims. It is a pigmented permanent plastic restorer that permanently colours black plastic and vinyl back to its original finish. Directions: Gloves must be worn at all times during the application process. 1) Prepare the surface to be treated. Clean, thoroughly degrease and rinse away residual degreaser with water. Ensure that the entire area is dry before continuing to the next step. 2) Shake bottle well for at least 2 minutes or until contents are thoroughly dispersed. 3) Apply product onto a microfibre cloth and coat entire surface evenly. 4) Allow 15-20 minutes to dry. 5) A second coat may be required if UV damage is severe. Note: Do not apply in direct sunlight or temperatures below 10 degrees C and above 20 degrees C. Only apply this product under cover or in dry weather. Allow to dry naturally undercover or during dry weather. Clean spillages immediately using cold water. Store in an upright position and secure when transported. Key Features: Permanent pigment revives colour which lasts. Colours black plastic and vinyl back to its original finish. Easy-to-use with no buffing required and dries within 20 minutes! Ideal for Unpainted Bumpers, Wheel Wells, Mouldings & Door Handles. Easy to apply About T-CUT Since 1954, T-Cut has been looking after the nation's cars. T-Cut is always asked for by name and is synonymous with removing scratches and restoring vehicle paintwork. The brand today consists of waxes, detailers, and technical restoration products to give your car that special showroom finish. T-Cut is proud to be owned and manufactured in Britain.