Nitromors Original All Purpose Paint & Varnish Remover delivers exceptional performance as a thick, green paste that adheres reliably to vertical surfaces, clearly marking where it's applied for precision work. Boasting a rapid blistering action, it's engineered to remove up to twice the number of paint or varnish layers per application compared to other paint strippers. By eliminating dichloromethane, this cleaner formula offers a safer yet still powerful stripping option. Whether you're restoring wood, preparing metal, or cleaning masonry, Nitromors remains the go-to solution for efficient, high-quality paint removal. Directions for Use: 1. Safety first: Wear gloves and goggles. Use outdoors or in a well-ventilated space. Protect surrounding areas with polythene and avoid open flames or sparks. 2. Prepare: Transfer a small amount into the cap (to avoid multiple openings) for controlled application. 3. Apply: Dab a thick layer (2-3 mm) directly onto the surface, do not spread with a brush. Limit coverage to areas up to 0.5 m². 4. Work: After paint blisters (about 5-10 minutes), reapply into the lifted areas and leave for up to 40 minutes. Apply a second coat if needed. 5. Remove: Gently scrape off softened layers using a scraper or nylon tool. For stubborn areas, use wire wool dipped in the remover. 6. Clean: Rinse with water and detergent, or use white spirit on delicate wood to avoid raising the grain. Sand lightly before refinishing.